22.5.14

Basic Quilting Steps And Longarm Quilting Services

By Minnie Whitley


The typical American home is never without a quilt. They are virtually everywhere around the house as mats, blankets, sheets, cushion covers, and the like. It is a hobby enjoy by generation after generations of mothers and daughters. It is characterized by little squares put together for a colorful overall effect.

It is done by hand when it first started. It usually takes a small group to finish a big project. Today, modern quilt projects are either done by hand, on a sewing machine, or on longarm quilting services system especially for rush orders. Beginners do not need to feel insecure when starting their first project. There are already cut quilt squares ready for use and patterns available for novices.

A quilt is basically made up of a sandwich of three layers of material. The lowest sheet is the back material. Plain fabric is usually used. On top of it can either be wool, polyester or cotton sheets. These add to the loftiness of the quilt. On the topmost is the quilt design itself, made up of little squares of fabric sewn creatively together.

Before starting you must prepare all the necessary equipment. For beginners, it is recommended that you use already cut squares for your convenience. You will also need a sheet of plain fabric for backing, and a sheet of batting. Aside from that, a sewing machine, needles, threads and pins is also essential, along with some scissors, iron and ironing board. To minimize clutter have a trash can.

First you make different designs by putting together fabric squares. Sew together about nine small scraps to make one big square, and do these again until you have more than enough bigger pieces for your project. Sew them by rows then piece them all together. Afterward, iron by rows.

Once your top is done, it is now time to sew them all together. You must have your backing material first and place in on top of a big table that it is lying face down. This last sheet should be the biggest among the three. A backing material that is slightly smaller than the first one is placed on top, then your design last. It should also be the smallest one among the three sheets. Since this is quite a big one to work on, you can use pins to bind them in place when sewing.

Stitch them all together by following the stitch marks on the design. For a more secured product, make many stitches to hold the layers in position. The technique for a more flat and neat finished product is to start sewing in the middle then slowly going to the sides. You will need binding as edge design. Take a long strip of cloth, iron it, then sew them in place all around.

The completion of the project is marked when the binding is already stitched in place. You can now wash it to give it soft and somewhat worn feel when you will already use it. The time frame usually depends on its size, though it is a well established fact that experienced quilters take less time than novices in finishing a task.

For those you can not do their own or simply do not have the time to do so, there are always ready made quilts on sale. You can also have a quilt made just for you when you go to quilting service centers. They use longarm systems so that you can have your orders in no time.




About the Author:



No comments:

Post a Comment